B16.9 Carbon Steel 90 Deg Elbows

Elbow is a common connection pipe in the pipeline，it is often used to change the direction of a pipe.Divided by Angle, the common elbow Angle is 45, 90, 180 of these three, because of different design and construction needs we often provide all customized services for customers.Classified by radius, elbows can be divided into long radius and short radius elbows.We mainly produce and sell metal elbow, such as: cast iron, carbon steel, stainless steel, zinc alloy, titanium alloy and so on. We have many large and small elbow moulds to meet your different needs under ASME/ANSI JIN DIN EN GB and other standards.We have a wide range of molds for elbow sizes to meet your different needs.Elbow can be divided into long radius and short radius according to the radius.After forming the elbow, it needs to be polished and bevelled in the later stage.Of course, surface treatment is also a very important link, we can provide: black paint, green paint, sand blasting, galvanized, epoxy coating, 3PE, anticorrosion and so on surface treatment process, to meet your different use environment needs. Seamless elbow: The elbow is a pipe fitting used at the Bend of the pipe. In all the pipe fittings used in the pipeline system, the proportion is the largest, about 80%. Usually, different forming processes are selected for elbows of different materials or wall thickness. Manufacturers commonly used seamless elbow forming processes include hot pushing, stamping, extrusion and so on.

A 90 degree elbow commonly used in pipeline installation is connected to two pipes with the same or different nominal diametre to make the pipe turn at a certain Angle and the nominal pressure is 1-1.6Mpa.

Elbow is a 90 degree elbow commonly used in water heating installation. It is used to connect the bend of the pipe and change the direction of the pipe.

Other names: 90° elbow, right Angle bend, love bend, stamping elbow, pressing elbow, mechanical elbow, welding elbow, etc.

Purpose: To connect two pipes with the same or different nominal diameters, so that the pipe can be turned 90°, 45°, 180° and various degrees.

Bending radius less than or equal to 1.5 times of pipe diameter belongs to the elbow, greater than 1.5 times of pipe diameter belongs to the bend.

Since most 90-degree elbows are used for welding, in order to improve the quality of welding, the end of the car groove, leave a certain Angle, with a certain edge, this requirement is relatively strict, the thickness of the edge, the number of Angle and deviation range are specified. The surface quality and mechanical properties are basically the same as the pipe. For easy welding, 90 degree elbows are made of the same steel as the pipe to which they are connected.

45 Deg Elbow   90 Deg Elbow   CON Reducer   Carbon Steel Caps   Slip On Flange   Welding Neck Flange