Payment Type:L/C,T/T
Incoterm:FOB
Transportation:Ocean,Air
Port:TIANJIN,QINGDAO
$10100-999Piece/Pieces
$9≥1000Piece/Pieces
Model No.: SO-F-B01
Brand: YOULONG
Place Of Origin: China
Standard: Ansi, Asme, Iso
Product Name: Forged ANSI B16.5/16.47 Carbon Steel SO Flange
Material: Customized
Application: Pipe Lines Connect
Standard: International Standard
Packing: Standard Seaworthy Packing
Usage: Joining Pipe Lines
Pressure: High Pressure
Surface: Paint Spraying
Service: Within 24 Hours Reply
Delivery Time: 15-25days
Packaging: Customized
Productivity: 1500 ton per month
Transportation: Ocean,Air
Place of Origin: Cangzhou
Supply Ability: 1000ton per month
Certificate: ISO9001,ISO14001,ISO45001
HS Code: 730791
Port: TIANJIN,QINGDAO
Payment Type: L/C,T/T
Incoterm: FOB
ASTM A694 F52 Flanges and fittings are designed to be used in high pressures transmission service. Therefore, these flanges are well suited for use in oil and gas transmission service or for use in the petroleum industry. Because of its high strength, in combination with superior toughness and low cost, the CS ASTM A694 Gr F52 Flanges are very popular in many industries. Manufactured in several grades, the flanges minimum yield strength at 2% offset in KSI is often indicated as its grade. Hence in the instance of Carbon Steel A694 F52 Material, the minimum yield strength at 2% offset is valued at 52 KSI. Elbow fittings are one of the more popular fittings that could be used to divert the direction of flow.
Typically the S A694 Gr F52 Elbow could be produced at an angle of either 45 degrees, 90 degrees or 22.5 degrees unless they are to be customized by the buyer. Many times, ASTM A694 Gr F52 Forged Fittings demonstrate an increase in its mechanical properties on account of the grain flow being refined and directed. ASTM A694 Grade F52 Blind Flanges are a type of component that is produced without a bore in the centre, and therefore, can be used to seal off or shut off valves or equipment or pipes in a piping system.
The F52 Carbon Steel Weld Neck Flanges are made up of a long tapered hub, which is similar to the bore of the pipe. These hubs provide support to pipes in high-pressure applications. The ASME B16.5 ASTM A694 Grade F52 Expander Flanges are an alternative to the weld neck flanges. These flanges increase the pipe size at the site of connection. The A694 Grade F52 Threaded Flange is mounted on piping systems with bolts or nuts. These flanges have a thread inside them, which matches the pipe they will be mounted. The ASME SA694 F52 Reducing Flange is used to join pipes of different sizes together. Our experienced workers make use of innovative technology and the best raw materials whilst producing all our products.
The SA694 Grade F52 Blind Flanges don’t possess a hub and are used to stop hydraulic flow in most piping systems. These flanges can be welded or bolted as per requirements. CS Gr F52 Slip On Flange is a popular cost-effective flange that can be easily slid on pipes and fixed at précised locations. All our products can be custom made in different shapes and sizes as per your requirements. If you want to know more about our products, pricing contact us.
Product Category:
45 Deg LR Elbow
90 Deg SR Elbow
Butt Weld Stainless Steel Tees
CS Butt Weld Crosses
Slip On Flange
Name
|
Slip On Flange
|
Size
|
Size 3/8” to 40”
|
Standard
|
API5L , ASTM A106 Gr.B, ASTM A53 Gr.B,ANSI A210-1996, ANSI B36.10M-2004 , ASTM A1020-2002,ASTM A179-1990 ,BS 3059-2,DIN 17175、DIN1630 、DIN 2448
|
Material
|
GR.B,ST52, ST35, ST42, ST45,X42, X46, X52, X56, X60, X65, X70,SS304, SS316 etc.
|
Certificates
|
API5L, ISO 9001:2008,SGS, BV,CCIC
|
Wall thickness
|
SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100 SCH120, SCH160, XS, XXS
|
Surface Treatment
|
black paint, varnish, oil, galvanized, anti corrosion coatings.
|
Marking
|
Standard marking, or according to your request. Marking Method: Spray white paint
|
Pipe Ends
|
Under 2 inch plain end. 2 inch and above Beveled. Plastic caps (small OD) ,Iron protector (large OD)
|
Pipe Length
|
1. Single Random Length and double Random Length.
2. SRL:3M-5.8M DRL:10-11.8M or As clients requested length. 3. fixed length(5.8m, 6m, 12m) |
Packaging
|
Loose package; Packaged in bundles(2Ton Max); bundled pipes with two slings at the both end for easy loading and discharging; End with Plastic caps; wooden cases.
|
Test
|
Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, hydraulic testing , X-ray Test.
|
Application
|
liquid delivery; Structure pipe; High and low pressure Boiler tube; Seamless steel tubes for petroleum cracking; oil pipe; gas pipe.
|
Delivery Time
|
7-15 days
|
Advantages
|
1.Reasonable price with excellent quality.
2.Abundant stock and prompt delivery. 3.Rich supply and export experience, sincere service. 4.Reliable forwarder, 2-hour away from port. |